Full Custom solutions of Power supplies
is given to RPT’s Development boards and also to third
party Development boards to get Full Life cycle and efficiency
.
Ramp Plus Technologies
providing own inbuilt power supplies to all RPT’s development
boards including CPLD ,FPGA, Embedded Micro controller ,Digital
IC trainers and all Starter Kits .
The following Product Specification is given for Power Supplies
1.DC regulated power supply Dual 0-30V ±10%,
2A and ±12V, ±5V Fixed 0-30, Continuously
Specification:
INPUT
Mains:
230V 10%,50Hz Single
phase AC Connection 3 Pin,5amps moulded cord
OUTPUT
Voltage
range 0-30V
VOLTAGE CONTROL
Single turn coarse
& fine control Current
2 amps
Current control
Single turn coarse
& fine control
Load regulation
0.01%3mv
Line regulation
0.01%3mv
Ripple
1mv rms
Stability
0.1% for 8hrs after
½ an hour Warm up Meters Individual 3 digit
DPM to Indicate volts & amps
Terminals
Provided on the
front panel with Earth
PROTECTION
Over load Continuously
presettable by Current control
Short circuit Through both AC & DC fusesOver
Voltage Presettable to trip for 12.5% to (optional)
117% of V nom.
ENVIRONMENTAL
Operating Temperature
0 to
50 Deg C
Humidity
90%RH at 45 Deg
C non condensing
Cooling
Natural convection
or forced air cooling
2.DC regulated power supply Single Channel 0-30V ±10%,
2A 0-30, Continuously
Specification:
INPUT
Mains:
230V 10%,50Hz Single
phase AC Connection 3 Pin,5amps moulded cord
OUTPUT
Voltage
0-30V, ±10%
VOLTAGE CONTROL
Single turn coarse
& fine control Current
2 amps
Current control
Single turn coarse
& fine control
Load regulation
0.01%3mv
Line regulation
0.01%3mv
Ripple
1mv rms
Stability
0.1% for 8hrs after
½ an hour Warm up Meters Individual 3 digit
DPM to Indicate volts & amps
Terminals
Provided on the
front panel with Earth
PROTECTION
Over load Continuously
preset table by Current control
Short circuit through both AC & DC fuses Over
Voltage Presetable to trip for 12.5% to (optional)
117% of V nom
ENVIRONMENTAL
Operating Temperature
0 to
50 Deg C
Humidity
90%RH at 45 Deg
C non condensing
Cooling
Natural convection
or forced air cooling
3.DC regulated power supply Dual 0-30V ±10%,
2A 0-30, Continuously
Specification:
INPUT
Mains:
230V 10%,50Hz Single
phase AC Connection 3 Pin,5amps moulded cord
OUTPUT
Voltage
0-30V, ±10%
VOLTAGE CONTROL
Single turn coarse
& fine control Current
2 amps
Current control
Single turn coarse
& fine control
Load regulation
0.01%3mv
Line regulation
0.01%3mv
Ripple
1mv rms
Stability
0.1% for 8hrs after
½ an hour Warm up Meters Individual 3 digit
DPM to Indicate volts & amps
Terminals
Provided on the
front panel with Earth
PROTECTION
Over load Continuously
preset table by Current control
Short circuit through both AC & DC fuses Over
Voltage Presetable to trip for 12.5% to (optional)
117% of V nom
